Device features: The composition of paraffin oil for smoke generators mainly includes mineral oil, water and soluble powder. Among them, mineral oil is one of the main components of smoke generators, and its role is to provide volatile substances that enable oil to be converted into smoke. Water is added to reduce the risk of fire from the oil in the smoke generator, and its role is to improve the safety of the smoke generator. Soluble powders are used to increase the density and stability of smoke. The smoke produced by the smoke generator is safe and non-toxic and will not cause harm to the human body. The main components of the smoke sprayed by the fire smoke generator are water and propylene glycol, which is food-grade smoke, safe, non-toxic and residue-free. Equipment parameters: 1) Model: 500ml 2) Brand: Zhijian 3) Odor: colorless and odorless 4) Medium: light paraffin water

The aerosol generator atomizes liquid paraffin into aerosol through the nozzle. It is mainly designed for the sensitivity and function test of smoke alarm and detector. SM220 aerosol generator adopts compressed gas to atomize liquid paraffin, therefor the aerosol generator includes precision pressure regulating valve and pressure gauge and time controller. It combines two operation modes: external and internal control modes. In external control mode, the aerosol on/off is controlled by 20VDC input signal. In internal control mode, the aerosol on/off is controlled by embed timer and external 24VDC power supply. The work duration and time interval are settable on time controller. Equipment parameters: Model: SM220 Power supply: 24VDC 50W Air supply: 0.5Mpa, dry, oil free, Agent: liquid paraffin Bottle: 100ml

Smoke Alarms – 智检仪器专业生产销售烟雾报警器探测器测试标准烟箱

Q: ZNOBS110 Obscuration meter

Equipment Function ： Optical smoke density meters are mainly used to measure the concentration of smoke or aerosols. The ZNOBS110 optical smoke density meter emits transmitted light from an infrared light source through the testing area of the smoke box and reflects it into the photoelectric element. By measuring the attenuation of the photoelectric signal, the concentration of smoke or aerosol in the smoke box is measured. The intelligent inspection instrument ZNOBS110 model optical smoke density meter adopts imported components and advanced photoelectric system, which can withstand the influence of environmental temperature changes and environmental light. Zero drift and temperature drift are extremely small, and can operate stably for a long time. The ZNOBS110 optical smoke density meter is suitable for use in standard smoke detector test boxes, fire test rooms, and other applicable occasions such as EN 54-7, EN 14604, GB 4715, GB 20517, etc. Specification ： 1) Model: ZNOBS110 2) Power: 12VDC Power: 10W 3) Applicable standards: EN14604, EN54-7, GB20517, GB4715 4) Detection type: Transmitted light 5) Light source wavelength: 880nm~950nm, 6) Range: 0-2 dB/m, 7) Zero drift 0.2% F.S.

Q: Imported standard cotton wick cotton rope smoke alarm test

The imported standard cotton wick burns for a long time, the smoke is uniform, the smoke rise rate and particle size can be adjusted, and the cost of consumables can be reduced.

Q: Fire Sensitivity Laboratory

Device features: The fire sensitivity laboratory is suitable for use in UL 217, UL268 and other standard fire test rooms, testing system room temperature sensor, furnace temperature sensor, data acquisition, computer and testing software. The test software can be connected to collect real-time test data such as optical smoke density meter, ion concentration meter, temperature and humidity sensor, record alarm values, and the software can select various material combustion test curves. Equipment Parameters : Model: ZNULFIR-1 Power supply: 220VAC power: 1Kw Applicable standards: UL 217, UL 268 Standard Components: Four-way photocell sensor Acquisition of four MIC signals (MIC ion concentration meter sold separately) Controller cabinets A carbon monoxide gas analyzer Two room temperature sensors, one humidity sensor and one furnace temperature sensor One igniter, one electric oven heating control Collect 8 detector alarm signals Igniter, fuel basin, electric stove, electric oven Optional Components: 1) Burn wood, burn cotton rope, polyurethane foam, beef patty 2) Ion concentration meter

Q: Manual fire alarm button test device

Device features: The manual fire alarm button test device is designed and produced in accordance with the EN 54-11 annex and includes both operational and non-operational functional testing equipment. The front and rear positions are easily adjusted by the handwheel, which is suitable for various types of hand-to-hand newspapers: GB 19880 Manual Fire Alarm ButtonBSEN 54-11 Fire detection and fire alarm systems. Manual call points The Manual Call point test device included operation test device and non-operation test device as specified in EN 54-11and ISO standards. The operation test device consist of brass spherical ball, and adjustable suspending arm, mounting board and release fixture. The non-operation test device consist of lever, and adjustable suspending pivot, mounting board and weight.It’s used to test the operation performance of Manual call points (MCP) for fire detection and fire alarm systems. Equipment Parameters : Model: ZNEN54-11 Standards: EN54-11, GB 19880 Machine size: 800 mm long, 600mm wide, 1500mm high Copper bead weight: 85 (+/-1) g

Q: SM210 Aerosol Generator

Equipment function: The aerosol generator atomizes liquid paraffin into aerosol through the nozzle. It is mainly designed for the sensitivity and function test of smoke alarm and detector. SM210 aerosol generator contain a brushless air pump and atomizer to atomize liquid paraffin. The aerosol on/off is controlled by 20VDC input signal. The work duration and time interval are settable on time controller. Equipment parameters: Model: SM210 Power supply: 24VDC 100W Agent: liquid paraffin Bottle: 100ml

Q: Heat Alarm & Detector Test Tunnel

Equipment Function ： The heat alarm & detector test tunnel is used to test directional dependence, static response temperature, response times test for fire alarm and detector. The equipment meets the requirements of GB4716, EN 54-5, BS 5446-2 and ISO standards. The standard test tunnel is composed of tunnel, heater, Chiller, temperature control system, computer etc. According to the requirements of standard specifications and parameters, we use fast response thermocouples and advanced PID controller to attain the heating rate of 0.2 ℃/min, 1 ℃/min, 3 ℃/min, 5 ℃/min, 10 ℃/min, 20 ℃/min and 30 ℃/min as standard required. The maximum temperature is up to 160 ℃. During the test, the temperature will be controlled at + / - 2 ℃. The specially developed Zomtest heat test tunnel software can automatically control the test process, record the temperature curve and record the alarm response time. Specification ： Model Number：ZNEN54-5HC Power supply：380VAC power：20 kW Test standards： BS 5446-2, EN 54-5, GB 4716 Temperature control：PID setting value +/-2℃ Temperature rise rate：2° C/min、 1°C/min、3°C/min、5°C/min、10°C/min、20°C/min、30°C/min Temperature range：5~160°C Test tunnel：1m x 0.5m x 1.1m，Test section size 430mm x 270mm Air speed：0~1.2 m/s Test items ： Directional dependence Static response temperature Response times from typical application temperature Response times from 25°C Response times from high ambient temperature (dry heat operational) Supply voltage test Other tests（need additional equipment）：